[ IMPORTANT ] Buyers MUST confirm their ATV/UTV Nut size is 10x1.25. These wheel spacers will not work with any other sized nut. Verify this to prevent fitment problems.
[ FITMENTS ]
Compatible with Honda: 1997-2009 Recon 250, 1988-2000 FourTrax 300, 2000-2009 Rancher 350, 2004-2009 Rancher 400 4WD, 2004-2016 Rancher 420 4WD
Compatible with Honda: 1996-2006 Foreman 400 4WD, 1998-2016 Foreman 450 4WD, 500 4WD, 2001-2016 Foreman Rubicon 500 4WD, 2003-2007 Rincon 650, 2006-2016 Rincon 680
Compatible with Yamaha: 1995-1998 Timberwolf 250, 1999-2005 Bear Tracker 250, 2005-2006 Bruin 250, 350, 2006-2009 Big Bear 250, 1996-2005 Big Bear 350 2WD, 1987-2008 Big Bear 350 4WD, 1987-2013 Big Bear 400 4WD
Compatible with Yamaha: 1995-2010 Wolverine 350, 450, 2007-2016 Grizzly 350, 450 4WD, 550 4WD, 700 4WD, 1993-2006 Kodiak 400, 450, 2004-2014 Rhino 450, 660, 700
Compatible with Suzuki: 2002-2007 Eiger 400, 2002-2009 Ozark 250, 2001-2016 King Quad 400, 450, 500, 700, 750, 2003-2007 Vinson 500
*** IMPORTANT ***
- Bolt Pattern: Vehicle must have 4x110 bolt pattern. Be aware that some have different bolt pattern for front & rear.
- Stud Size: If your ATV does not have 10x1.25 threaded wheel studs, this will not fit.
- Stud Length: If your vehicle's wheel studs are longer than 1.0" (25mm), the back of your wheels needs pockets to accommodate the stud/lug nuts.
- Tools: A torque wrench is required for installation. Do not use air tools or impact wrenches.
- Check and re-torque all nuts within 10-20 miles of installation. FAILURE to re-torque lug nuts could cause a loss of wheel and result in serious accident or injury.