LiteMark Stick-On Reflectors
Our reflectors are designed with highly prismatic lenses secured to a durable transparent resin base. Produced on a clear poly liner, they are easy to work with and the reflectors peel cleanly for application.
Each reflector is marked with the SAE A DOT certification. These reflectors are easy to install and are a cost-effective alternative to plastic models. Retro-reflected light meets or exceeds SAE J592 A.
Reflectors are often located on the front or rear bumpers, on the sides of flat beds, trailers, back of mirrors or on the corners of the grille or fenders.
These versatile reflectors aren't just for vehicles and boats you can use them where you need extra guidance at night. Mark the mailbox or on metal driveway markers for ease of locating your turn. Healthcare facilities and care homes use these to designate outside areas for safety, mark garbage or storage bins.
Rectangular Reflector Dimensions: 2 inches Wide x 3.5 inches Long.
Circular Reflector Dimensions: 3 inch Diameter.
All trailers are required to have stop lights, tail lights, turn signals, and reflectors. Trailers that are 80" wide or wider, or that are 30' long or longer need additional lights and reflectors. A trailer that is 80" wide or wider and has a Gross Vehicle Weight Rating (GVWR) over 10,000 lbs. requires conspicuity treatments. These treatments consist of strips of reflective tape or rows of individual reflectors that create an alternating pattern of red and white along the sides and rear of a trailer to make it easier to see.Our Reflectors may be used for many other applications to promote visibility and safety. Not recommended on unsealed wood or concrete. A thin layer of a clear primer may be used to promote bond on porous surfaces as it will penetrate the surface and eliminate water from wicking under the sticker adhesive.