[Easy To Use]: It is a gear pump that can handle cold oil, but the speed is relatively slow. If you need to quickly pump oil, please heat the oil in advance. For the special situation where the car is parked on an inclined road, it can reduce the oil change time and ensure your personal safety.
[Installation Instructions]: After pulling out the red plug, install the silver connector into the pump body, install the largest diameter pipe on the outlet side of the pump (with an arrow at the top), and tighten it with a hose clamp. Install the small diameter pipe into the connector joint, and then assemble the medium diameter pipe into another connector joint, connect the power supply, insert the pipe into the engine and oil collection bottle, and then turn on the switch on the pump.
[Attention]: Before using this oil pump, please tighten the accessories to prevent it from inhaling too much air, cause the pump to run continuously and the oil extraction speed to be slow, making the oil pump itself very hot.
[Application]: Suitable for changing the oil of lawn mowers, pressure washers, or other small engines. It can handle different fluids and can effectively suck out old liquids and put in new liquids.
[Including]: 1 x pump; 2 x water inlet hose; 1 x water outlet hose; 2 x battery clips; 2 x hose clamps; 1 x car cleaning cloth