Designed for boat trailer bunk board set ups that commonly use 2 x 4 inch Bunk Board sets and also to adjust the angle to the contour of the boat hull. Mounted to cross members in front and behind the axle or mounted to cross members that are C Channel in shape and have different dimensions.
These galvanized 8 inch Bunk Brackets have slotted 1/2 inch diameter holes to accommodate 1/2 inch Trailer Bolts or Boat Trailer U-Bolts . The slotted holes allow you to adjust the height of the bunks. The 8 inch measurement is the length of the bracket itself.
Notice - Mounting & attachment hardware is NOT included. You will need to measure your crossmember or trailer frame and get the appropriately sized U Bolts and Lag screws for the bunks.
Package includes (4) 8" uprights and (4) swivel tops.
Installation: Direct bolt on, professional installation is highly recommended.
SavvyCraft 4 Bow Bimini Top Replacement Cover, Durable Marine Grade Canvas Sun Shade Boat Canopy, Easy Install Zipper Sleeves, 8ft and 10ft Long 4 Bow Replacement Canvas Only No Frame
KWD 47.500
-18%
SEAFLO DC Diaphragm Pump - 12v, 3.0 GPM, 45PSI w/Automatic Switch
KWD 20.500
Shoreline Marine Winch Strap with Hook
KWD 8.500
Slam Latch 2'' Flush Pull Latch Black Plastic Nylon Handle for Hatch Door Cabinet Hardware on RV Boat Camper Trailer Fit 2mm-20mm,Pack of 2
KWD 6
