GFCI Outlet Tester, DURFICST Electrical Outlet Tester with 1.7'' High Definition LCD Display, Standard 3-Wire 120V Receptacle Tester, Detects Common Home and Office Wiring Problems
【1.7" HD DISPLAY】More intuitive and easier to use than most outlet testers on the market, the DURFICST GFCI outlet tester with 1.7" LCD display helps you quickly and accurately measure outlet wiring, voltage, and the time it takes for a GFCI device to trip. For your convenience. If there is a wiring problem, the LED will immediately turn red.
【ONE-TOUCH GFCI TEST】The DURFICST outlet tester with GFCI helps you verify that the tripped circuit breaker is working properly at the touch of a button. Press the GFCI button and if the GFCI outlet trips, it means the leakage protection function is normal. It detects and identifies common wiring faults, ensures electrical safety and proper operation of the GFCI receptacle, and can be used to test plug safety in homes, factories, offices or buildings. Note: Use caution when using this function with regular
【ELECTRICAL PROBLEM TESTER】The DURFICST electrical outlet tester uses standard U.S. 3-wire and GFCI-protected 120-volt AC receptacles. This outlet tester plug in detects the most common wiring faults: Open Ground, Open Neutral, Open Hot, Hot/Neutral Reversed, Hot/Ground Reversed and Dual Open (Neutral & Ground). Can be used in homes, factories, offices or buildings, etc., is a powerful assistant to protect your electrical safety.
【AUTO HOLD & TRIP TIME DISPLAY FUNCTION】Press the GFCI button and the LCD display of the DURFICST outlet voltage tester will show the time it takes for the GFCI device to trip, making it easy to troubleshoot quickly and accurately. For hard-to-reach outlets, the Auto Hold feature holds the reading for convenience and ease of use, and it's equipped with a 3-minute auto shut-off, low battery indicator, and an ergonomic design that's sleek and portable.
【Easy to Use】Simply plug the DURFICST grounding outlet tester into a standard receptacle, press the GFCI button, and results are displayed on the screen within 3 seconds. Bright LEDs illuminate clearly for easy visual observation and identify six common wiring problems when activated. An easy-to-understand text description on the tester helps determine the condition of the wiring in the receptacle based on the LED results.
-13%
Fluke 325 Clamp Multimeter AC-DC TRMS
KWD 131.500
-9%
Jonard PT-300 Voltage Protected Coax Cable Wire Tracer Pocket Continuity Tester & Toner with Audible Beep and LED
KWD 10
5Packs 2in1 1-8s Lipo Li-ion Battery Voltage Tester Check, Monitor RC Low-Voltage Buzzer Alarm for 1-8s Lipo/Li-ion/LiMn/Li-Fe
KWD 13.500
ORIENTEK TFI-40 Optical Fiber Identifier All-in-one Chuck Live with 10mw VFL 800nm-1700nm Fiber Detector Fiber Traffic Identifier OFI
KWD 30
