Search

Search

-15%

Amp Meter, 50A High Accuracy LED Display Digital Ammeter Amp Meter Gauge with Hall Effect Sensor Transformer, Isolated Amperage Detector Tester Gauge for Solar Energy System, Car

KWD 8.500
KWD 10
Brand
Diydeg
Weight
42 g
– 1 +

Special Features

  • 【For Forward and Reverse Current】This DC ammeter with hall sensor can measure the forward and reverse current of the line, display the positive current in the forward direction (the decimal point of the ammeter is always on or off), and display the negative current in the reverse direction (the decimal point of the ammeter flashes slowly).
  • 【Through-hole design】The digital current meter adopts through-hole design, the wire passes through the hole directly. No need to cut the wire, no need to destroy, no need to change the original current line can realize the current measurement, breaking the use of shunt ammeter limitations and restrictions. No current direction limitation.
  • 【Isolated Measurement】Because of the complete isolation of the current sensor and the measured wire, the digital ammeter can measure the current of the positive pole of the power supply, the negative pole of the power supply, the current of a certain line or equipment in the line. The voltage withstand value between the measured wire is up to 2KV.
  • 【Current Calibration】Under the condition that there is no current flowing, use a slotted screwdriver to adjust the zero potentiometer behind the mutual inductor until the decimal point of the ammeter flashes quickly as the best point. A slow flash indicates that the zero point is biased toward negative values and vice versa.
  • 【Wide Applications】The ammeter head is equipped with two wires, simple wiring, easy to access the solar system, car, battery car, motorcycle car wiring, used to monitor the battery voltage, timely grasp of the battery charging and discharging status. The current gauge can also be used for other products current measurement purposes.

Description

Specification:
Item Type: Digital Ammeter
Material: ABS
Current Range: 50A Test Range (V):+/-0.0-50A, Resolution (A): 0.1A
Power Supply Voltage: 4-30V (Wide Range) Note: The Maximum Input Voltage Cannot Exceed 30V, Otherwise There is a Risk of Burning
Display Mode: 0.52in LED, Red
External Dimension: Approx. 54 x 30 x 21mm / 2.13 x 1.18 x 0.83in
Installation Opening: Approx. 47.2 x 27.3mm / 1.86 x 1.07in
Measurement Rate: ≥ 500mS/Time
Measurement Accuracy: 1% (± 2 Words)
Minimum Supply Voltage: +4.0V
Maximum Supply Voltage: +30V
Working Temperature: - 10-+65℃
Working Humidity: 10-80% (No Condensation)
Working Pressure: 80-106kPa
Exposure To The Sun: Direct exposure is not allowed

How to Use:
Red line: positive terminal of meter power supply (note: voltage between red and black lines cannot exceed 30V)
Black line: negative terminal of meter power supply

Package List:
1 xDigital Ammeter

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}