Parking Brake

Replacement for:
for RZR 800/900/1000/Turbo/Turbo S

Features:
- Protect your transmission so that it will not be damaged when parked on a hillside
- If you often drive in fields or beaches, it is recommended that you use one of the parking brakes to protect the transmission when parking on a slope

Installation Instructions:
1. Remove 2 nuts form bottom 2 bolts of brake master cylinder. A 6"extension on the socket wrench makes this very easy
a. RZR Models have 13mm nuts. (2008 thru current, 570, 800, 900 1K and Turbos)
b. RZR XP Pro Models have 15mm nuts
c. RSI has 13mm nuts
d. The General has a 13mm on the left and 10mm on the right
Do not over tighten the 10mm nut on re-install, the studs are weak and could break
2. Insert parking brake on bolts where nuts were removed
3. Install original nuts and tighten. On the General, do not overtighten the 10mm nut

How to Operate:
Push brake pedal with right foot, slide lacking arm over with left foot to engage. To release, push brake pedal

Package Includes:
1x Parking brake