AOPUTTRIVER AC splitter with AOPUTTRIVER clamp-on ammeter or multimeter Allows measurement of up to 15A without separating the load's power lines
Use A Clamp Meter (Sold Separately) Around The 1X Position For A Direct Current Reading; Use The 10X Position To Display Low Current Readings Multiplied By 10
The splitter also has an additional changeover switch that can be placed in the OFF (OPEN) position when the current being measured is relatively low, only in the uA or mA level
The excellent splitter makes your job easier in measuring the current consumption of your household appliances.
Plug the power connector into the line splitter, check the socket wiring and measure the voltage
Description
Specification:
Apply mains socket: Single phase tow pole and earth
Operating Voltage: AC 100~230V 50/60Hz
Rated current: Max 15A
Voltage measurement socket
Small(uA or mA)current measurement socket
Large current measurement two window: ×1 and ×10
Small current & large current measurement change-over switch
Window size: 25.4 × 25.4mm (1/1 inch)
Operating environment: Temperature 32 to 104°F (0°C to 40°C),
Humidity ≤ 80% RH.
Dimension: 162(H) x 60(W) x 27(D) mm
Weight: Approx. 200g