【Fuel Line Fuel Pressure T-fitting Adapter】Keeping track of your fuel pressure is vital to your engine performance.Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to a Inner Diameter Fuel Line. T-fittings allows you to tee off your vehicle's fuel line for accurate fuel pressure readings directly from the source.
【High Quality】This fuel line T-fitting adapter is made from Iron.And the hose clamps are made of zinc plated steel that provide maximum corrosion resistance to salt and most chemicals.
【leak-free connection】Two yellow nylon rings are installed in both ends of the fitting.The two hose clamps are for installation in tight-fittings and secure the vehicle's fuel line to the barbed fittings for a leak-free connection. Clamping range about from 22.4-24mm.
【Application】For 1/2 Inch Inner Diameter Fuel Line, Quick Connection.For 3/8 Inch Inner Diameter Fuel Line, Quick Connection. For 1/8-27 NPT Middle Port, Connecting Fuel Pressure Gauge Sensor. For Universal Fitment. (Cars, Motorcycles, Trucks, Vehicles, Boats and etc.)Vehicle compatibility charts are for REFERENCE ONLY. Check product type and size to match your needs.
【Installation Steps】1,Cut the Fuel Line:Using a tube cutter, remove approximately one inch from your fuel line and secure both ends of the cut line with the included hose clamps.2,Install the Adapter:Install the T-fitting into the two cut ends by firmly pressing the hose until fully sealed. Secure the T-fitting to the fuel line using the hose clamps.3,Thread in the Sensor: Thread your fuel pressure sensor into the port on the T-fitting adapter and tighten. Your sensor is now in place and ready for use.
Y Block Flare Fitting Adapter,6AN Male Flare Fuel Pump Hose Pipe Connector,6AN to 6AN to 6AN Aluminum Adapter Fitting,Blue
KWD 4.500
Aluminum Air Cleaner Spacer 1/2 Inch For 5-1/8 Inch CARBURETOR OPENING for Edelbrock Holley Demon Riser SBC BBC 350 Ford Air Filter Spacer O-Ring
KWD 7.500
-17%
Carburetor Dual Feed Fuel Line Kit, Aluminum Alloy Fuel Line Stainless Steel Braided 8 AN Dual Inlet Fuel Line Kit For Holley 4150 Carburetor, Red Blue
KWD 12.500
BARTOO Air Flow Meter Base MAF Sensor Mount Fit for Nissan Honda Civic Ford MAF Air Intake Meter Adapter 3" maf Sensor Adapter (3", 1)
KWD 8.500
