HXHAUTO has extensive experience in window lift motor . Through careful design and remanufacturing
by our team, we can improve performance and durability while using better materials and efficient
technology, so that you can meet the demands of high quality and low cost while shopping happily.

Do your Windows not go up or down properly?
If your car window have can not lift, pause, weakness, abnormal sound and other problems, may be your
Window regulator or window lift motor damage caused by failure, you need to replace in time，this will bring convenience to your life.

Product information
Accessories type: Window Lift Motor
Installation position: Front Left Driver Side
Anti-Clip Function Included: YES
Terminal of connector: 5 Pins
Mounting Type: Threaded Insert（M5 screws are twisted directly into the aluminum insert）
Window Regulator Included: NO
Quantity Sold: 1 Piece

Reference Number：8572034030 742-615 47-10027 82-10027

Replacement of the following models
Toyota Sequoia 2001-2007 Front Left Driver Side
Toyota Tundra 2004-2006 Front Left （Extended Cab Pickup Only）

Tips:Please pay attention to your model, year and installation position before purchase.

After a new motor is replaced or your car battery is powered off, it needs to be reset before you can get the one-click lift and anti-pinch function.
Reset method :

1： Hold down the lift key and manually lift the window to the highest point.

2： Release the rise button.

3： Hold the raise button for a second time and release it after 3-5 seconds. Single touch anti-pinch recovery.

It is necessary to turn on the ignition. After opening, first place the glass halfway in the position, then press the regulator until the glass rises to the end.

Hold down the button for a second or two at the same time, then release the switch, so the setup is complete, and then you can test it.

The approach is basically the same for different models. Some models basically four doors have anti-pinch function, do so, four doors set separately.