Specifications:
-Name: 12 LED Lighting System Kit
-Material: Plastic
-LED bulb quantity: 12
-Working Current: 100mA
-Input voltage: 4.8V - 6.0V
-Lights color: White, red, yellow, blue
-Connection method: CH1 - Servo
-CH2 - Speed controller
-CH3 - Receiver
-Suitable for: 1/10 RC cars
-LED cable length: about 300mm
-Circuit board size: 53 * 33 * 15mm
-Weight: 57.2g

Lights Description:
-Headlights: 4 white LED lights
Connect the lighting system to the CH3 on receiver: the transmitter can independently control a group of lights, another group of lights are on when the car speed up;
Not connect to the CH3 on receiver: 1 group of lights are always on, another group of lights are on when the car speed up.
-Turn lights: 4 yellow LED lights
With the remote control change the direction, the lights will synchronous flashing.
-Taillights: 2 blue LED lights, 2 red LED lights
The blue lights are always on. When the car speed up or brake, blue lights will go out. Only when brake, the red lights on.

Please note:
-The light can only work with the light box, and it cannot be unplugged and powered on alone.
-All the 12 LED Lighting System Kit are tested before we shipped out. If there is any problem when you use it, please don't heasitat to contact with us.

Installation Method:
-CH2 Transmitter
Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1 and CH2 to receiver.
-CH3 Transmitter:
Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1, CH2 and CH3 to receiver.

Package list:
-1 * 12 LED Lighting System Kit