Measure voltage: DC 3-30V (two wires Access).
Input Polarity: DC voltage
Dimensions: 48mm x 29mm x 22mm
Refresh rate: about 300mS / times
Operating temperature: -10°c to 65°c
Wire length: 20cm
Reverse Connection Protection
Method of wiring
Red wire: Positive
Black wire: Negative
Measurement accuracy: Less than 10V, accurate to 0.01V; More than 10V, accurate to 0.1V (allowable tolerance: 1% +/- 1 word).If the input voltage is higher than DC30V, the voltmeter will be burnt.
Please don't use this meter in 24V battery because when the battery is full-charged, its voltage will be about 30V.