Search

Search

TuTuYa Universal Carbon Fiber Trunk Spoiler Lip Kit, 4.92ft/1.5m Universal Spoiler Car Rubber Strip Bar Spoiler Tailfin Tailfin Rear Wing Tailgate Hatchback for Most of Popular Cars

KWD 6
Brand
TuTuYa
Weight
0.7 kg
ColorCarbon Fiber
– 1 +

Special Features

  • 【ADJUSTABLE】L 1.5m x W 3.8 cm ,the universal Car rear spoiler can be cut if too long for your car
  • 【UNIVERSAL】HIYAZONE Car Rubber Strip is universal ,can use for most popular car.
  • 【WATERPROOF】High-density waterproof material, water directly condenses into water droplets on the surface
  • 【DECORATION&PROTECTION】The car trunk spoiler lip can be used for pressure tail, top wing, front stalls spoiler glass.It can fit perfectly according to the original car range and make your car looks great
  • 【HOW TO INSTALL】1.Clean the pre-installed position,make sure the position is clean and dry before install. 2.Measure the length of tail in need. 3.Cut off excess length if too long,heat it if possible. 4. Use the adhesion promoter(wipe paper) to wipe the pre-installed position,then waiting about 10s. 5.Tear the cover of glue of one end of universal spoiler and stick it on car,then tear more and stick it from one end to another.6.Put on the 2-end sleeve ,them can be perfectly closed
  • 【FOR BETTER EFFECTIVE】please use a heat gun or hair dryer to heating up the Tape or Glue;they go on easy if you heat up each section of the rubber
  • 【TIPS TO PREVENT CAR SPOILER FALL OFF】 1.Please install the car spoiler in good weather day or warm indoor. it would be better if use a heat gun or hair dryer to heating up the tape or glue;they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND) 2.Follow installation instruction. 3.Leave the car alone for at least 24 hours after install the car universal spoiler.

Description

Spoilers for cars description:
Size:Approx. 4.92ft/1.5 meters long, 3.8 CM width
Material: rubber
Color: matt black
application models: the rear spoiler is fit for most of popular cars
Decoration: Can be used for pressure tail, top wing, front stalls spoiler glass

How to install:
it is easy to install the car spoiler,and only need to adjust the position;
cut the perfect size to match with your car if too long, two covers are included to seal the cut fringes;
specifics about intallation please check the photo.

For Better Effective:
please used a heat gun or hair dryer to heat the glue or tape of car spoiler, then it's will be easy to install

Tips to prevent car spoiler fall off:
1.Please install the car spoiler in good weather day or warm indoor.
it would be better if use a heat gun or hair dryer to heating the tape or glue; they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND)
2.Follow installation instruction.
3.Leave the car alone for at least 24 hours after install the car universal spoiler.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}