ECCPP 4 lug Wheel Spacers 4x110mm to 4x110mm 74mm 1.5 inch Fits for Brute Force 650 for Vinson 500 Ozark 250 for Eiger 400 for Grizzly 350 450-4PCS

🚘【4PCS Wheel Spacers 4 LUG】 4x110 vehicle bolt pattern, 4x110 wheel bolt pattern,74mm Center bore,Outer Diameter(5.708 inch),M10x1.25 thread pitch,2"(50mm) thick
🚘【Compatible with】 These 4x110 wheel spacers Fit 2009-2013 for King Quad 500 2005-2007 for King Quad 700 2008-2014 for King Quad 750
🚘【About the thickness】 For the 1.5 wheel spacers 4 lug Please confirm about the Fender Gap,this decides the thickness range should be fitted. For a car without leveling lifting,to avoid rubbing,the thickness of wheel adapters should be less than the fender gap. For example,if your fender gap is 2",It is better to choose spacers which is less than 2" thick
🚘【Benefis】The wheel spacers 4x110mm to 4x110mm Widen your vehicle wheels base by allowing for a more aggressive stance, rubbing easily and instantly,greatly improve the vehicle stability! Box Packaged,bolt-on easy installation
🚘【Essential VERIFY FITMENT】 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 10x1.25mm threads; 2) You have more than 1.5 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.5 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 74mm,advise torque specs at 63-80 N/M

Hello,