Battery Jumper Clamp - Perfect Solution to Your Car on the Road Suddenly No Power Problem, Help Your Car Emergency Borrow Power!

Battery Jumper Clamp Specifications：
- Clamp Length: 154mm / 6.06 inch
- Handle Width: 107.7mm / 4.24 inch
- Collet Width: 25mm / 0.98 inch
- Maximum Current: 1000 AMP
- Cable Gauge: 2-6 AWG
- Input: 12-24 V
- Color: Black+Red
- Material: PAC, Pure Copper

Battery Jumper Clamp Packing：
- 1 * Black Battery Charging Pliers
- 1 * Red Battery Charging Clamp
- 2 * Crimp Terminal
- 2 * Screws
- 2 * Nuts

How to Remove：
- Remove the black wire clips from the body or ground of the "rescued vehicle".
- Remove the black wire clip from the "rescue vehicle".
- Remove the red wire clip from the "rescue vehicle".
- Remove the red wire clip from the "rescued vehicle".

NOTE：
- If you find that the rescued vehicle will not start, check the metal contact parts for poor contact.
- You must also follow the order when removing the wiring, otherwise it will possibly cause a short circuit.
- If you find any fluids residue near the battery of the rescued vehicle, please connect the black clamp to the metal casing near the engine of the rescued vehicle.