Front Inner Axle Seal Installer for 1978-2016 Ford Super Duty Dana 50 / Dana 60 Axle

【Application】This front inner axle seal installer is suitable for All Ford Super Duty straight axle trucks 1978 - 2016 Dana 50 / Dana 60 Axle
【Axle Seals Installer】Our Super Duty Inner Axle Seal Installer allows to install these oil-bath design seals to the correct depth without seal damage. Replace the worn-out axle seal to prevent oil from leaking out the ends of the front axles tubes.
【Easy to Operate】Install the new seal onto the seal driver. You can assemble a 1/2 inch drive extension ( not included) to reach from the seal driver to the outer end of the axle housing. Then install the driving adapter on the extension, and punch it with a hammer until the seal is seated.
【Long-lasting】Kit include axle seal driver and 1/2 inch driving adapter. This Dana 50/ 60 inner axle seal tool kit is made of heat-treated, high-quality, impact-resistant steel that lasts longer than common steel. No worry about breaks and cracks.
【100% Satisfaction Guarantee】：If you're not 100% satisfied with this superduty inner axle seal installer, simply return them for a full refund in 30 days. Support 12 months Warranty.

Front inner axle seal installer is suitable for All Ford Super Duty straight axle trucks 1978 - 2016 Dana 50 / Dana 60 Axle.

How to use:
Step1: Disassemble the front axle and remove the old inner axles seals

Step2:Install a new seal onto the seal driver.

Step3: Position the seal driver and seal assembly squarely into the housing.

Step4: Assemble 1/2 inch extensions as necessary to reach from the seal driver to the outer end of the axle housing.

Step5: Install the driving adapter onto the last 1/2 inch extension and drive the seal firmly into place by hammering firmly on the driving adapter.

Step6: Until the seal is seated all the way, then remove the seal driver and reassemble the axle

Hello,