OE Part Number: 11025

Applicable to the following models：
Compatible with 1999-2022 Ford
Compatible with 2011-2022 Chevy/GMC
Compatible with 1999-2012 Dodge

Installation instructions:
1.Install the roll over valve into the fill line adapter tee.
2.Cut the factory fill line to make room for fill line adapter tee.
3.Install adapter tee as horizontal as possible.Make sure the roll over valve is upright.
4.Secure the adapter tee with large clamps on either end.
5.Remove drain plug from auxiliary tank.Install shut-off valve.Drill a hole through truck bed.
6.Clear sharp edges of hole, Feed fuel hose to correct length needed to reach roll over valve.
7.Check all areas where you installed hose clamps looking for any signs of fuel leakage. Once you have determined there are no leaks you are ready to hit the road.

Package Including:
Fuel Hose X1
Aluminum Tee X1
Rubber Hose Sleeve X2
Large Hose Clamp X4
Small Hose Clamp X4
Shut-off Valve X1
Roll-over Valve X1
PTFE Tape X1