This is a new version of the FixSac storage net created and marketed by our company in early 2019. The success of the first has been the source of many comments and suggestions from our customers. This allowed us to develop the product by adding some improvements.
An innovative method of fixing, WITHOUT MAKING HOLES, on almost any surface using only a screwdriver. Thanks to the 4 EasyFix integrated nut stickers, supplied with M4 x 12mm screws, FixSac can be applied to: sheet metal, glass, plastic, polyester, tiles, melamine, plywood, lacquered or painted wood.
FIxSac already exists in two sizes: 45 x 40cm and 35 x 30cm. These are the maximum recommended dimensions between the fixing points, once the nets have been hung on the hooks. Each net is also supplied with 4 wood screws. If you do not want to use the glue-on option, you can still screw the product into a wooden or other support.
Installation advice: THE SUPPORT MUST BE FLAT, CLEAN, DUST- FREE AND DEGREASED. Use the appropriate cleaning product. If you want to put the product on a metal sheet, (eg utility vehicle) we advise you to use acetone. Remove the protective films and stick the EasyFix stickers at the desired location in relation to the size of the net.
Press well in the middle to adhere the central part. Expel air bubbles to the periphery. It is best to wait at least 12 hours before screwing on the studs and hanging the Fixsac. Note that this fixing method is NOT SUITABLE FOR PAINTED MURS… the adhesive of the stickers sticks too strongly, and risks chipping the paint!!!
Description
This is a new version of the FixSac storage net created and marketed by our company in early 2019. The success of the first has been the source of many comments and suggestions from our customers. This allowed us to develop the product by adding some improvements.