Rear Wiper Arm Cap Deco-Bulldog, 3D OM, Stylish 3D Printing Plastic, Compatible with MINI Copper(F55,F56) 3D OM's rear windshield wiper arm cap is an accessory part that can be exchanged for existing parts to express individuality.(Check the vehicle-MINI Cooper F55,F56) Remove the existing wiper arm cap by 1:1 exchange method and replace it with the newly purchased cover. The accessory part is made with 3D PRINTING. An accessory that makes the car behind you smile. [How to replace] (1) If you pull on the part where the washer fluid comes out, it comes out easily. (2) Open the front part of the new arm cap slightly with both hands, insert it into the connection part, and press the part where the washer fluid comes out with your thumb, and it is combined with a "click" sound. [Caution] *Due to the characteristics of 3D printing materials and work, the surface may not be rough and clean. It is not a defect, so please take this into consideration before purchasing. *Please be careful when washing your car. If the microfiber towel gets caught, the joint may be damaged.