Unleash speeds up to 2.4 Gbps
Supports dual-band networks (2.4 / 5 GHz) with up to 160Mhz channel width
REQUIRES 9th+ Gen Intel Laptop system with CNVio2 support. This means your system MUST have been made in 2020 or later AND have CNVio2 support.
**MANY SYSTEMS ARE NOT COMPATIBLE. Consult your system manual or manufacturer** No known support for Desktop / Workstation Systems
**Your system will not recognize this card--or may even fail to turn on--if not compatible**

2.4Ghz / 5Ghz (160Mhz) support with speeds up to 2.4Gbps
Support for Bluetooth 5.2 and 2x2 MU-MIMO 802.11ax Wi-Fi
NOT compatible as an upgrade from AC-9560, AC-9461, or AC-9462

**Your system will not recognize this card--or may even fail to turn on--if not compatible**
Instellatuin:
Turn off your system's power, open the back cover, and locate the current wireless module.
Gently remove the old antennas & old network card (there might be a screw to remove too). A small screwdriver from an eyeglass kit can easily free the antenna connectors.
Reaffix the set screw, if needed, and then install your new network card.
Gently and very carefully attach your original antenna connectors to your new network card. Line up the antenna and network card connectors, and gently push down.
Test your new Wi-Fi Card by powering on your system. If your system does not automatically install the drivers, you will need to manually install both the Wi-Fi and Bluetooth packages.
**If your system does not recognize the adapter after installing the drivers, you may have purchased a non-compatible card**