Exhaust Back Pressure Tester - Angchun Exhaust Back Pressure Gauge with 6FT Hose 2.5" Gauge and Rubber Protector Two Multi-Colored Bands Catalytic Converter Test Kit with Adapter (M12 & M18)
👍👍👍【Professional Diagnostic Tool】The catalytic converter tester is designed to help you quickly and accurately understand the condition of your vehicle's exhaust system, allowing you to diagnose problem areas in your exhaust system back pressure so you can take your next steps. Use this exhaust gauge to gain vital knowledge about your vehicle's exhaust system and prevent poor engine performance.
👍👍👍【Accurate Gauge】The exhaust back pressure tester's 2.5" inch gauge has easy-to-read markings in psi and bar. 3 colors to indicate the good or bad status, the highly visible mark greatly helps users to directly read the data. The exhaust pressure tester is tested at idle and 2500rpm. Pressure should be less than 1.25psi at idle and less than 3psi at 2500rpm.
👍👍👍【Easy to Use】Just disconnect the sensor wires and remove the sensor. Install the sensor adapter. And then push the hose end onto the adapter and make the pressure test. The adapter with exhaust back pressure gauge are M12 and M18. Start car, read data, 6ft hose with gauge tester allows user to test from driver seat.
👍👍👍【Complete Accessories】The special 2.5" gauge with rubber protector has two multi-colored bands, with pressure shown in psi and bar. And the adapter has M12 and M18 threads, allowing the technician to test the exhaust gas without back pressure through the adapter. Fully equipped for a variety of models.
👍👍👍【Warmly Reminder】The pressure gauge is checked and calibrated to ensure accurate test results. If the meter pointer is not in the initial state "0", the meter may have been affected during transportation. You can remove the case and adjust the pointer to "0", this will not affect the test results.
15PCS Metric Thread Chaser Set, Thread Repair kit with 7 Taps Thread Chaser Set Universal Metric Thread Restorer Kit with 7 Dies and 1 Thread File Rethreading Kit Universal Rethreading Tool
KWD 11
Swpeet 121Pcs 3/32" 1/8" 5/32" 3/16" - M2.4/3.2/4/4.8 Rivets with Aluminum Blind Rivet Gun Assortment Kit, Manual Rivet Gun Kit with 4 Manual Interchangeable Rivet Heads and 4 Twist Drills Attached
KWD 10
AVID POWER 6 Inch Buffing Polishing Pads 5Pcs for 6 Inch Backing Plate, Compound Buffing Sponge Pads for Car Buffer Polisher Compounding, Polishing and Waxing
KWD 10.500
Mekar Cam Timing Alignment Tools Compatible with Ford/Mazda Zetec 2.0L 2.3L 2.5L MZR/Duratec Engines
KWD 6
