DIRECTIONS MACHINE POLISH 1*Protect all the painted surfaces around the headlight lens with painter's tape to prevent damage. 2*Large defects on heavy worn lamps can be roughen by sandpaper of 2.000-3.000 grade. 3*Clean and degrease the surface to be treated( using K2 KLINET or windshield cleaner) before use. 4*Apply a small amount of polish to the foam pad, before turning on the drill. 5*Spread the paste with a 600 RPM drill, then increase up to app. 1.200 RPM drill and polish the lens until the cloudy haze is gone. 6*Use a clean microfibre to buff the lens dry. Hand Polish 1* Clean and degrease the surface to be treated (using K2 KLINET or windshield cleaner) before use. 2* Apply the paste with sponge or microfibre and polish the lens until the cloudy haze is gone and the surface becomes smooth. 3* Use a clean microfibre to buff the lens dry. We recommend use of K2 QUANTUM Synthetic wax (which acts as a sealer) to protect the lenses from future yellowing and haze. WARNING Do not use product K2 Lamp Doctor when exposed to the sunlight. Keep away from surface overheating. Safety Precautions Keep out of reach of children. Expiry date: 5 years of the date printed on the tube ending.