Looking for a device to extend your AHD / HD-TVI / HD-CVI, PAL, NTSC and SECAM CCTV camera systems over an optic fiber?
Then look no further - ADnet's AN-AHDCT1001 series Fiber (Converter) extender set offer easy, affordable and Plug-n-Play solution for extending HD AHD TVI CVI CVBS 960H NTSC SECAM based cameras signal over distances up to 1 km (0.62 miles) using Multimode Fiber, and up to 20 (11.42 miles) km using Single Mode type fiber.
Simply plug in fiber optic cable using SC connectors at one side, and BNC connectors to your camera at Transmitter side and DVR or Monitor at Rx side, and units will be up and working immediately.
Since signal is directly sent over the fiber, there is no any delay to video signal introduced at all - you'll have real, live signal transmission at receiver side.
In doubt will they work with your particular camera?
Contact us at any time & send us your camera model name and specifications for free consulting! IMPORTANT!: Converters DO NOT support so called UTC technology (Up The Coax, meaning that Video + PTZ Data signal is sent over same BNC port) for PTZ!. Use for Video ONLY
IMPORTANT!: Maximum supported resolution for this model is up to 5 MPx , 1080p & 2560x1920 !
Specifications:
Transmission Wavelength: 1310 nm
Fiber Type: 50/125u multi-mode, 62.5/125u multi-mode，9/125u single mode
Optical Port Type: SC
Dimensions: 12.40cm x 10.50cm x 2.90cm / 4.88in x 4.13in x 1.14in
Input Power: 5VDC - 100 - 240 AC Universal Adapter Comes In Set
Video Input Connector: BNC
Operating Temperature: -10℃～+60℃