PECS: M14x1.50 Thread - Closed End Bulge Acorn Mag Seat Lug Nuts - 1.77" Tall

FITS: Vehicles with wheel studs requiring a 14x1.5 thread and wheels that take a thread seating style hex etc.

VERIFY FITMENT: By matching this lug's specs (thread, seating style, hex, etc.) to match both your vehicle and wheel requirements. Or contact our Customer Experience Team to verify a safe and proper fitment.

INCLUDES: 24 Pcs Silver Closed End Bulge Acorn Lug Nuts Cone Set

The above shows only some models, if you have any problem ,contact our Customer Experience Team to verify a safe and proper fitment.

Installation Instructions:

1. Make sure wheel studs are clean and tight. Replace ortighten a problem stud.

2. Ensure the wheel is flat against mounting surface withstuds through each hole.

3. All nuts should be hand started and thensecured in a criss-cross sequence with a torque wrench and socket. Refer to your vehicleowner's manual or wheel manufacturer's guide for propertorque specifications. 12mm Lug size should use 70-80 torque.

4. Check and retighten all nuts after 25 miles of driving andagain after 50 miles, until wheel nut torque remains unchanged.