Directions: Snappy Teak-Nu Formula No. 1 must be used with Snappy Teak-Nu Formula No. 2 using bristle brushes to achieve the best results. FOR LIGHTLY SOILED TEAK: 1. Wear protective gloves. Use water to dilute Snappy Teak-Nu Formula No. 1 to an approximately 50% solution. Use bristle brush to spread evenly over area to be treated. When the treated area darkens to a uniform dark brown, use medium bristle brush to scrub lightly. Avoid contact with painted or varnished surfaces. Rinse brushes thoroughly after use. 2. Next, use water to dilute Snappy Teak-Nu Formula No. 2 to an approximately 50% solution, then use bristle brush to spread uniformly over treated area. Use soft bristle brush to scrub lightly to attain a uniform light color. Rinse treated area thoroughly. FOR BADLY SOILED, OILED OR COATED TEAK: 1. Wear protective gloves. Apply Snappy Teak-Nu Formula No. 1 directly to wet deck. Use bristle brush to spread evenly across area to be treated. When the treated area darkens to a uniform dark brown, use coarse bristle brush to scrub wood. Avoid contact with painted or varnished surfaces. Rinse brushes after use. 2. Next, use bristle brush to spread Snappy Teak-Nu Formula No. 2 uniformly over the treated area, then use coarse bristle brush to loosen and remove dirt. The treated area will lighten to a golden brown. Rinse treated area thoroughly with water. When the treated area is completely dry, the deck will look like it has been freshly sanded.