√【Compatible with】:We specifically made these to address the issue on the 4.7L M278 engine vehicles, but found out there are other Mercedes engines that use the same sensor.Fits several 2011-2019 Mercedez with 4.7L Turbo engines. This is for a set of 4 that go to the 3 pin cam position sensors. This specific listing is for the 3 pin sensors.
√【Applicable scenario】:Fits this part number Cam position sensor:A276 156 07 90.Mercedes camshaft adjustment solenoids commonly leak oil from the sealing ring or through the harness connector. If the solenoid is leaking from the electrical connector it should always be replaced and the harnesses included in this kit should be added at the same time to prevent damage to the main engine harness. This will save you money in the long run.
√【Product Features】: It is a common failure on the 4.7L engines and all 2012-2020 Mercedes engines that use these specific magnetic camshaft adjusters where oil destroys your factory engine harness after time. This results in a $10K bill from the dealer to replace your entire engine harness.
√【Method of use】:You plug this plug and play wire harness pigtail extensions from the engine harness to the sensors. When they start causing problems from oil spillage you simply unplug them and throw them away and replace with new ones. No special labor require. Unplug from the sensor and plug these in place. Save yourself a lot of headache and money!
√【High-Quality】:This 3 pin Harness Extension Kit meets or exceeds OEM standards and we provide 100% inspection prior to shipment to ensure no quality issues.
-9%
XTPTFABS 10PCS 45MM Excavator Bucket Pin Shims Compatible with Komatsu Cat Bobcat Kubota Takeuchi Case（1.5mm thick）
KWD 14.500
CVS18 Universal Split Constant Velocity Gaiter, Universal CV Boot Kit Split Joint Gaiter Stretchable Replacement Car Auto Parts,XTPTFABS
KWD 7.500
XTPTFABS Parking Brake Knob Tractors Parking Brake Knob Compatible with John Deere Equipment D100, D105, D110, D120, D125, D130,D140, D150, D155, D160, D170.(Replace#GX23146，Orange)
KWD 5.500
-5%
XTPTFABS 2 sets of piston rings Compatible With Kohler Engines 83mm standard bore (no oversize) 1.5mm Rings Style A. Fits Ch25, Ch26, Ch730, Ch735, and Others (Replace#24 108 14-S/ 2410814s)
KWD 18
