Mini 4P to 2x Right-Angle SATA:It adopts one-to-two output mode, which can be connected to two hard disks or optical drives with SATA interface at the same time to improve efficiency and save space.Mini 4 Pin port plugs into specific brand computer motherboard (NOTE: It is mini 4 pin port, not standard 4 pin port.), Right-angle 15 Pin SATA port plugs into the hard drive.
Compatibility:Compatible with applicable to specific brand computer motherboards with mini 4-pin ports and widely compatible devices with SATA interfaces, such as SSD, HDD, Blu-ray drives, and CD drives.
High-quality cables: The tinned copper wire interface can prevent the core from becoming black and brittle.Four standard 18AWG ribbon cables are slender and strong, resistant to high pressure and abrasion.
Plug and play,flat cables are not easily twisted and knotted, which is convenient for cable management in daliy life.
Well-made, tightly connected, no accidental disconnection will cause the connection to be interrupted
Description
This cable supports computers to install SSD drives.
Note: This cable only applies to computer host motherboards of specific brands with mini 4-pin ports, such as: M410/M415/510S/510A/M610/M710/B250/ M2601K/M4900K/T4900D/M4601K/W2090C/M4400C/M4400C 000e/dd 75/M710/M720/M910 etc. If you connect it with other incompatible motherboards, it will burn or damage the motherboard, please check the compatible types carefully or contact us if you are not sure about it.
Connector A: ATX 12V mini 4 pin (this product is a mini 4 pin port, not a standard 4 pin, please refer to the picture for the interface size)
Connector B: 2x SATA 15-pin right angle
Material: 18AWG tinned copper wire(better than bare copper)
Packing: one mini 4 pin to 2xSATA cable