Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W/Zero, Terminal Block HAT, GPIO Status LED

Compatible models -> Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (Note: NOT compatible with Raspberry Pi 400.)
GPIO status LED -> LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level.
Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
Terminal block and header -> Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54mm / 0.1in pitch.
GPIO name -> The BCM numbering name of each GPIO is printed next to the port.

Important Notes:

This product is NOT compatible with Raspberry Pi 400.

Overview:

This breakout board can help you wire and know the status of the GPIO.
Mount it on your Raspberry Pi with a few screws and standoffs.

We provide free technical support to help you with any questions and problems.

Compatible Models:

* Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero

Tutorial:

Comes with tutorial to show how to use. (Download needed, no paper tutorial.)
The download link can be found on the product box.

Package Includes:

1 x Breakout Board
10 x M2.5*12 Standoff
5 x M2.5*4 Screw
1 x Cross Screwdriver
1 x Slotted Screwdriver

Hello,