DRIVEN Water Spot Quick Spray Concentrated Cleaner is an exceptionally quick detailer that can be applied in direct sunlight for removing fresh water spots and surface contaminants from all hard surfaces including fiberglass, paint, windows, and metal. This highly concentrated, biodegradable solution, not only cleans water spots, it brightens and enhances the finish while strengthening Driven's non-stick protection with every application. It's also remarkably economical. Just add water and make 1 gallon of fluid for every pint of concentrate. Once activated by water, this unique formulation works by combining biodegradable cleaners, the power of citrus, and a full spectrum of essential polymers and oils. Driven's high lubricity formula encapsulates water spots, dust particles, fingerprints, and other fresh surface contaminants, allowing them to be wiped away without streaking. Unlike other “Water Spot Removers'', DRIVEN Quick Spray Concentrate will not strip polish or wax. And it won't stain rubber or vinyl. Quite the contrary, this formula deepens and enriches all hard surfaces, adding brilliance and protection to your finish.

Directions for use:
Never spray and wipe an extremely dirty surface. Shake the bottle slowly. In a high-quality, 1 quart (32-ounce) spray bottle, add 4 ounces of Quick Spray Concentrate (7 to 1 RATIO). Slowly fill the remainder of the 1-quart spray bottle with fresh water (distilled water works best) or clean tap water. ONE GALLON of spray can also be pre-mixed, by adding the entire contents (16 fluid ounces) of concentrate into an empty ONE GALLON CONTAINER. Slowly fill the remainder of the gallon container with water and use it as needed. A shade application is preferable. Spray down the area to be cleaned. Wipe down and dry the sprayed area immediately with a very soft dry cloth to remove water spots and fresh surface contaminants. Keep wiping until the area is completely dry and streak free.