(Sun Visor) In the summer, you can't use your smartphone due to temperature protection, battery control and the touch screen cannot be operated by rain drops, and we have received many voice and developed this sunshade for your smartphone holder. The construction allows the visor to be moved up and down, expandable brim, aluminum shroud for heat insulation, and ventilation for enhanced heat dissipation. Sunscreen Rainproof: Due to the effects of heat caused by the sun and heat generated by maximum brightness of the screen, it will not be able to use your smartphone due to temperature protection. Reduces temperature rise by creating shade and darkening screen brightness. The raindrops adhered to the screen may cause uncontrollable operation or malfunction. Keeps you from rain and maintains operability. Note: 1. Due to the effectiveness of the sun visor, there is a possibility that the meter is difficult to see. 2. As the weight increases, the strength of the clamp bar may cause vibration to shake or break. Recommended: KDR-H3/KDR-H4W/KDR-HB1/KDR-HB2/KDR-HB2L/KDR-HB3/KDR-HB4, NOT Compatible with KDR-H3-2 (easy to swide)/KDR-H4-2/KDR-H4-3/KDR-H4S 3. A separate mounting part may be required. KDR-V1 Coaxial Type: The 0.7 inch (17 mm) ball mount does not have the threads included with this product is used with long bolts on rails with threaded threads. The one-piece construction gives the back of the holder a clean impression. Note: 1. Since it is only vertical adjustment, it cannot be mounted if the clamp bar is angled and the holder is adjusted to the front of the ball joint. 2. The back of the holder requires space for the sun visor. There may be interference with screens. 3. Not for use with any other than 17mm ball type. Not supported: KDR-M11C-M/KDR-M11A-M/KDR-M14C-M/KDR-M14A-M/KDR-M18SL/KDR-M19SL/KDR-M23A/KDR-M23C/KDR-M25/KDR-M26A/KDR-M26C/KDR-M28 [KDR-V1-M/Separate Type] Holder Independently next to Breakaway mounting construction Use the included 1" ball bar mount and the 1" ball on the sun visor in an intermediate mount. The angle can be adjusted in all directions, so it is highly versatile for many clamping conditions and environments, and can be mounted to the Kaedia smartphone holder. Compatible Model Numbers: Compatible with all model numbers; Product Details; Visor Size: Height 4.3 inches (110 mm), Width 4.7 inches (120 mm), Depth 6.3 inches (160 mm); Material: ABS, aluminum alloy; Weight: KDR-V1/335 g; KDR-V1-M/470 g); Contents: Sun Visor (bolt fixed); 0.7 inch (17 mm) ball bar mount (diameter 12 inch (diameter 12 mm) Rubber Tape, Rail(K) DR-V1) / Sun visor (1" ball), 1" ball bar mount (diameter 1.3 inches (32 mm), attachment (0.5 inches (12 / 22 / 25.4 mm), 0.08 inch (2 mm) rubber tape, intermediate mount 3.5 inches (90 mm) (KDR-V1-M). Note: 1. Smartphone holder is not included. 2. Depending on the smartphone model or usage purpose, you may not be able to experience the effectiveness. 3. There are many adjustment points, so you may feel the difficulty of DIY installation. 4. Installation may be difficult due to the conditions that are unique to the vehicle. The visor may drop or move due to the specific performance of the vehicle and driving conditions.