Description:

Material: ABS
Dimensions: 38*38*6mm
Unit weight: 7g
Battery: CR2032 button battery, 200mAh(Included)
Range: 15m (0-50m depends on the environment )
Functions: anti-loss, selfie, location, record
Compatibility: IOS, Android

Package Iist:
1 * Anti Loss Finder Device
1* Key Ring
1* English User Manual

[Instructions for Use]

1. Switch on/off
Power on: Aafter long pressing for about 3 seconds, there will be three sounds of "didi", and the indicator will flash quickly for 10 seconds. If there is no connection and no key operation, it will continue to flash for 30 seconds every 2 seconds and then power off.
Power Off: After pressing about 3 seconds, there is a long sound of "di" , and the indicator light will go out.

2. Add Device
Turn on the mobile phone Bluetooth, enter the APP, skip the boot interface, and directly enter the "Add Device" interface.
After searching for a new device, click Auto Connect, click Auto Connect, as shown in the figure. (At this time, you can also edit the device name as needed).
After connecting, click the alarm icon, as shown in the figure, you can hear the alarm sound of the anti loss device, and you can find the anti loss device. "Didi" sound can make continuous calls. If you click the alarm icon again, the sound will stop.
Entering the setting, you can select the alarm ring and alarm distance.Click "System Settings" to view the recording file and set the double click option.

3. Take photos
Use the camera function and click the device to take pictures.

4. Positioning
The location function can only keep the position when the loss preventer is disconnected from the phone. You can find the location record in "Lost Record". To use this function,you need to turn on GPS and keep your phone connected to the network.