What's in the package
Head Light x 1
Rear Light x 1
Binder x 3 (1 for headlight; 2 for taillight)
USB Charging cable x 2
Remote x 1

Headlight Features
6 lighting modes - Long press to turn off
Super bright with 1000 lumen
85 degree wide beam
Service time when fully charged: 3 hours
Range: 200 meter
Power indicator
USB charging time: 1 hour

Headlight IO Operation:
Side red light is always on in use;
Switch location indication is always on in use.
Press IO x1: Floodlight high
Press IO x2: Floodlight low
Press IO x3: Spotlight
Press IO x4: Floodlight + Spotlight
Press IO x5: Slow flash of both lights
Press IO x6: Fast flash of both lights
Long press to turn off

Head light Installations:
Screw the binder to the light as tight as you can.
Bind the light to the handlebar or any other part of the bike you like.
Adjust the light to a suitable angle.

Caution
Do not point the light to human eyes directly.
When the beam turns to dim, charge the light.
Rain proof only. Do NOT soak it in water.
Turn off the switch to avoid battery waste.

Rear Light Installation:
The lights and remote have been paired in factory. Long press the tail light IO button until the LED lights flash, then press the remote button to re-pair.
Put the binder onto one side of the light, to bind it under the saddle.
Put the bind onto one side of the remote, to bind it on the handlebar.

Rear Light Remote:
Left: Left flash;
Right: Right flash;
Press Left+Right: Double flash.
Press "LED" x1, Red warning light.
Press "LED" x1, Red and blue light fast flash.
Before using the remote, please make sure the tail light is on.