Product Fitment Information:

Compatible With Chry-sler
===========
2007-2009 Aspen Limited [For V8-5.7L,(No Hybrid)]

Compatible With Do-dge
===========
2005-2009 Durango [For V8-5.7L,(No Hybrid)]

2005-2010 Ram 1500 PICKUP [For 5.7L V8 Gas]
2005-2010 Ram 2500 PICKUP [For 5.7L V8 Gas]
2005-2009 Ram 3500 PICKUP [For 5.7L V8 Gas]

Compatible With Ram
===========
2011-2012 Ram 1500 PICKUP [For 5.7L V8 Gas]
2011-2012 Ram 2500 PICKUP [For 5.7L V8 Gas]
2011-2012 Ram 3500 PICKUP [For 5.7L V8 Gas]

Package Includes:
1 x Electronic Fuel Injection Throttle Body Assembly - TB1055 (12-Month Warranty)

Part Specifications
Connector:6 Pin Male
Inside Diameter:3-1/8 In. (80 mm)

Complete Throttle Body Assembly Includes:
Throttle Actuator Pre-assembled
Idle Air Control (IAC)
Throttle Position Sensor (TPS)

Throttle Body Installation Notes

After replace the throttle body, the idle speed is usually high, unstable or the engine fault light on.

This is because the newly installed throttle body parameters are inconsistent with the original.

Now you need to match the throttle to the computer. The matching process actually is to clear the original memory of the ECU, and restart the self-learning.

When the computer cannot match, you can use the following manual method to match

1.Disconnect the negative pole of the battery line to eliminate the memory function of the ECU, and install it after 1 minute.
2.Turn off the ignition switch, unplug the EFI and ETCS fuses in the fuse box in the engine compartment, and put it back after 1 minute.

The above two methods are to eliminate the ECU's memory, if the idle speed is still high, ECU can return to normal speed through 1 ～ 2 days of self-learning.