You will get maximum performance from our gasket materials when you use our gasket installation procedure. [1] clean and inspect the flanges, surface or parts that require gasket
Clean or replace your bolts, nuts & washers. Lubricate the bolt's, thread, nuts, washers and the underside of the head with graphite based compound
Flat washers are recommended to assure even distribution of the bolting force. Ensure lubricant doesn't contaminate gasket. Carefully insert the gasket between the mating surfaces
The use of a torque wrench is highly recommended. This assures a longer life and leak free performance. Whether an automotive head gasket or a flange gasket, it should be torqued
Make four even increment passes in a 12-6-3-9 o'clock pattern sequence. The appropriate stress on the gasket material you use is key to its success which varies depending material chosen
Sterling Seal and Supply , Inc. API 601 9000IR4316GR150 Spiral Wound Gasket with 316SS Inner Ring, 4" Pipe Size x 150# Class Flange x 316SS/Flexible Graphite
KWD 7
Sterling Seal and Supply , Inc. API 601 90001304GR1500 Yellow Band with Gray Stripe Spiral Wound Gasket, High Temperature (Thermal Cycling) and/or Pressure Variations, 1" Pipe Size, 1500# Class Flange, 304SS Windings with a Flexible Graphite Filler
KWD 3
Joint Sealant PTFE, 1/2" wide x 30 feet long, “DIY" Gasket Material, QTY: 1 spool
KWD 49.500
Sterling Seal 900014304GR900X6 304 Stainless Steel Spiral Wound Gasket with Flexible Graphite Filler, Pressure Class 900#, for 14" Pipe, Yellow with Grey Stripe (Pack of 6)
KWD 167.500
