→1.《1C15 main functions》: 1C15 handheld data oscilloscope, 110M analog wideband, 1 channel AC/DC, 500MS/s sampling rate, plus or minus 400W measurement voltage, with 1KHZ/3.3V square wave test signal, time base range 5ns-10s, support single trigger, can be one key automatic. The vertical sensitivity of the oscilloscope 1C15 is 20mV/div-100V/div, with 50%/return;
→2.《Oscilloscope details》: there are comprehensive trigger modes: automatic trigger, normal trigger, single trigger; It can be automatically adjusted, there are 14 waveform measurements; It adopts the design scheme of FPGA + ARM+ADC (MCU), the storage depth is 12kpts, the charging mode is 5V/800mA, and the battery capacity is 3000mAh; After full charge, it can work continuously for more than 10 hours, and can support reference waveform and waveform saving;
→3. 《The use of oscilloscope 1C15》: with 1KHZ/3.3V square wave test signal, just connect the probe to the calibration end to see this waveform on the screen, and calibrate the oscilloscope or probe based on this waveform parameter; Automatic adjustment, after pressing the Auto key, the oscilloscope will automatically measure the amplitude and frequency of the waveform, and automatically adjust the horizontal and vertical gears to make the waveform display in the middle of the screen, operation mode: button + joystick;
→4.《1C15 appearance》: screen size 2.4 inches, size 130mm*17mm*27mm, 1C15 screen resolution of 320*240, oscilloscope adopts eight-way stick game stick, waterproof conductive silicone buttons, anti-slip and anti-fall shock-absorbing silicone sleeve, can hide the bracket;
→5. 《Accessories and usage scenarios of oscilloscope 1C15》: high-voltage probe/alligator clip probe/data cable, charger/electronic file manual; It can be used for daily maintenance as well as R&D, education industry.