The dual wall heat shrink tube has great electrical insulation and excellent sealing, suitable for wire connection, protection and insulation of cable end, wiring harness and electronic components, and electrical DIY.
The heat shrink tube is a 4:1 heat shrink ratio and will shrink to the original 1/4. When the adhesive-lined tube is heated, the adhesive in the inner layer shrinks will melt at the same time as the tube shrinks, the adhesive flows to stuff the small space between the heat shrink and the object after the tubing and adhesive has cooled down, becoming an IP68 waterproof seal.
Steps of installation:1.Prepare heat shrink tube and cut it to the length you want; 2. Put the wire in the heat shrink tube ; 3. Shrink with a heat gun.
When using the heat gun to heat, pay attention to moving back and forth to make the heat shrink tube heated evenly. All size above is measured manually, please allow a +/-1/2 inch error.
MECCANIXITY Terminal Block 500V 10A Dual Row 3 5 10 Positions Screw Electric Barrier Strip 6 Pcs
KWD 6
MECCANIXITY Terminal Block 500V 60A Dual Row 3 Positions Screw Electric Barrier Strip 2 Pcs
KWD 5.500
MECCANIXITY Terminal Block 600 Volts 36 Amps Dual Row 3 Positions Screw Terminal Electric Barrier Strip 4 Pcs
KWD 4.500
MECCANIXITY Stove Thermocouple Cover Tube 2x8x250mm Thermocouple Ceramic Protection Cover Pink 4 Hole for Stove
KWD 3
