【Special Design】: Excellent double-sided PEI magnetic build plate design. The smooth surface and matte texture can meet your needs at the same time. Genuine PEI powder coating is heat resistant which temperature resistance can be up to 200℃ with no deformation.Higher cost performance and One multi-purpose.
【Easy to Use and Long life】:No glue, No tape, PEI printed bed with authentic 3M has strong adhesion; No scraping, easy to remove the printed matter from the bed by bending. Through hundreds of experimental tests, repeated use is still as new. After many times printings, lightly scour the surface of the PEI with some mild steel wool with 400 grit will have great adhesion or use alcohol to clear it and let it dry.
【High Quality】: Made of high quality stainless steel and strong magnetic base, tear off the backing paper and stick it to the bed, stick the magnetic base to your build plate, then put the steel plate on the magnetic plate. Please remove the protective film on the surface before printing. Flexible, detachable, high strength, heat-resistant, four-layer design, thicker and more durable. Easily handles temperatures up to 130°C. Great for PLA/PETG/PEEK/ABS and other filaments.
【Wide application】: Three sizes are available: 220mm, 235mm, 310mm. Magnetic PEI sheets are compatible with Ender 3 / Ender 3X / Ender 3 Pro / V2 / 3 Ender 3 Prox / Ender 5 / Ender 5 Pro, CR-20, CR-20 Pro, etc.
【 Notice】: There is a transparent protective film on the surface of the smooth PEI sheet spring steel build plate, which needs to be torn off before use. If there are bubbles on the film, it is not a quality problem, just tear it off, it will not affect the use.If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.
Description
1.Wipe the print surface before and after a print with isopropyl alcohol to maintain a clean surface for maximum bed adhesion strength. 2.As with any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface.