Power: 1W; Total Length: 60mm / 2.36 inch; Resistor Part Size: 10.5mmx3.5mm / 0.39 inch x 0.14 inch (H*D); Wire Diameter: 0.4mm / 0.02 inch; Resistor Value: 100 ohm ±5%
These carbon film resistors are good for use in audio amplifiers, power supplies, signal processing circuits, and other electronic projects. They can be used for voltage regulation, current limiting, and signal conditioning applications. Their high precision makes them suitable for applications that require accurate resistance values.
To install these resistors, identify the required resistance value and tolerance for your application. Insert the resistor leads into the appropriate circuit pads or terminals, observing polarity if applicable.
When using these resistors, ensure that the power rating and tolerance are suitable for your application to prevent overheating or circuit failure.
The carbon film resistors offer excellent stability, low noise, and high reliability. They are known for their high precision and accuracy. . The flame-proof coating ensures added safety in case of overheating or short-circuiting.
-20%
uxcell® 10 Pcs 15mm Diameter Piezoelectric Copper Buzzer Film Gasket
KWD 2
uxcell DIP Quartz Crystal Oscillators Resonators 4.096MHz HC-49S Replacements 20 Pcs
KWD 3.500
uxcell Surface Mounted Devices Chip Resistor, 220 Ohm 1/4W 1206 Fixed Resistors, 1% Tolerance 200pcs
KWD 2.500
uxcell 12Pcs 50K Ohm Variable Resistors Single Turn Rotary Carbon Film Taper Potentiometer with Knobs
KWD 4.500
