PROTECTS YOUR PUMP: running a pump without water can severely damage a pump; this switch automatically shuts pump off when pressure decreases 10 PSI which prevents the pump from running dry
M4 TYPE: has manual reset lever and 1/4-inch Female NPT threading at the bottom of the unit; once well has recovered, hold down lever to manually re-start pump
PRESET FOR 30-50 PSI OPERATION: cut in pressure = 30 PSI; cut-off pressure = 50 PSI, adjustable
LIMITATIONS: designed for 115 Volt pumps up to 1.5 HP and maximum 20 Amps, or 230 Volt pumps up to 3 HP and 17 Amps
ADJUSTABLE CUT-IN/OUT PRESSURE: see product label under cover for adjustment instructions
ILOVETOOL 28 mm Dia Spherical Head Diamond Grinding Bit Coated Mounted Points Round Ball Burs Grit 80 Shank 6mm Coarse Tools for Stone
KWD 4.500
Cubitron 3M 89816-case 341D Cartridge Roll, 1/4" x 2" x 1/8", 80 X-Weight (Pack of 100)
KWD 29.500
uxcell Wire Wheel Brush with Shank Bench Stainless Steel Crimped 3.35-Inch Wheel Dia for Removing Rust Polishing Metals
KWD 6
-17%
Forney 72736 Wire Wheel Brush, Fine Crimped with 1/4-Inch Hex Shank, 3-Inch-by-.008-Inch
KWD 2.500
