ADDS A 90° TURN TO 1/4 IN. TUBING:Connects two lengths of 1/4 in. distribution tubing or dripline with a 90° bend
CREATES A BRANCH FOR FEEDER LINE:Use barbed elbow to create a feeder line using 1/4 in. tubing by connecting other end to supply line
HOW TO INSTALL:Insert barbed end into the drip tubing opening and anchor it in place. (Tip: soften the tubing end so it's easier to work with by soaking in hot water or leaving out in the sun for pliability.)
KEY FEATURES:Single-barbed fitting inserts into drip tubing and anchors into place; handles water pressures up to 50 psi
SPECIFICATIONS:Pack of 10; Made of ABS treated with UV inhibitors to prevent cracking; Fits ¼ in. tubing or dripline with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.
Hooshing 1/2" Hose Barb Brass 3 Way Shut Off Valve 2 Switch Y Shaped Ball Valve with Stainless clamps for Water Fuel Air
KWD 7
Water Tube Fitting,Quick Push to Connect,Tee Thread Union 1/4" to 1/4" OD,for RO System,Filter,Drinking,Purifier Pack of 10（Tee Side T-Type
KWD 3.500
Hromee 3/4-Inch Equal Elbow Fitting for 3/4-Inch Tubing Use with Air Piping System
KWD 6
Wilkins 12-460XL FNPT x FNPT Spill Resistant Pressure Vacuum Breaker
KWD 88
