BIGTREETECH Manta M8P V2.0 integrated Control Board
Additional Product Features
1. The main board reserves BOOT button, can update the motherboard boot program through DFU;
2. Increase protection circuit of the thermistor to prevent the control chip from burning due to leakage of the hot bed or heating rod;
3. The 24V, 12V, 5V voltage of the CNC fan is optional, which saves the operation of external transformer module, thereby reducing the probability of damage to the motherboard;
4. The MCU firmware can be upgraded through SD card, or the MCU firmware can be updated through DFU through Klipper's make flash command;
5. On-board TMC-driven SPI and UART working modes, on-board DIAG function pins, can be used by simply plugging and unplugging the jumper cap;
6. Support material break detection, shutdown, BLTouch, RGB lights and other functions;

Product Parameters
1. Logic voltage: DC3.3V
2. Drive input voltage: 24V, HV (24-60V) optional
3. Mainboard input voltage: VIN=DC12V or DC24V
4. Hot bed input voltage: BED IN=DC12V or DC24V
5. Heating interface: hot bed (HB), heating rod (HE0,HE1,HE2,HE3)
6. The maximum output current of the hot bed port: 10A, peak value 10.5A
7. Maximum output current of heating rod port: 5.5A, peak value 6A
8. Fan interface: 5-way two wire CNC fan (FAN0, FAN1, FAN2, FAN3, FAN4, Pi FAN), 2-way four wire CNC fan (FAN5, FAN6), 1-way normally open fan. The CNC fan voltage (5V, 12V, 24V) is optional;
9. Maximum output current of fan interface: 1A, peak value 1.1A
10. Total current of heating rod + driver + fan: less than 12A
11. Temperature sensor interface: 5 channels of 100K NTC, 4 of which are optional ports for NTC and PT1000
12. Display: Serial touch screen, SPI touch screen, LCD display
13. PC communication interface: Type-C
14. Support machine structure: Cartesian, Delta, Kossel, Ultimaker, CoreXY