Features:
20 Pieces 3 pins AMS1117-3.3 DC 4.75V-12V to 3.3V voltage regulator power supply buck 800mA module

Easy to install:
Please read the wiring diagram (included) carefully before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally. AMS1117-3.3 is a positive voltage regulator power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.

Applicable occasions:
The 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 Development Board, 3.3V Low power consumption MCU, FPGA/CPLD PLD Programmable Logic Systems, ARM7 ARM9 ARM11 STM32, etc.

Specifications:
Output current: 800mA
Line adjustment rate: 0.2% (maximum)
Load regulation: 0.4% (max.)
Package Type: SOT-223
Operating junction temperature range: -40 to 125°C
Welding temperature (25 seconds): 265°C
Storage temperature: - 65~150°C
Output voltage: 3.267 to 3.333V (IOUT: 0 to 800mA, VIN :4.75V to 12V)
Line adjustment (maximum): 10mV (VIN :4.75V to 12V)
Load regulation (maximum): 15mV (VIN = 5V, IOUT: 0 to 800mA)
Voltage difference (maximum): 1.3V
Current limit: 900 ~ 1500mA
Quiescent Current (Max): 10mA
Ripple suppression (minimum): 60dB
Size: 8.6 x 12.33 mm

Package includes:
20 x AMS1117-3.3 modules

Note:
Please do not exceed operating voltage, or it will be damaged easily.
Exceeding the maximum allowable power consumption will result in excessive chip temperature.
Can not reverse polarity, or it will result in short circuit.
The manufacturers' names and part numbers have been mentioned above for purposes of demonstrating compatibility, not as trademark, our trademark is Frienda.