Wrong Phase Protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light.This product complies with GB/T 14048.1-2000, GB14048.5-2001 eqv IEC60947-1:1999.
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority.Three-phase voltage imbalance protection, static phase loss protection, reverse phase protection, lightning protection, and resistance.
Dynamic Phase Loss, Static Phase Loss Protection: Refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.There is no requirement for motor wiring when used for motor protection.
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W.
Delay Protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release.
YWBL-WH 5 PCS/Set Motor Driver,ULN2003 Driver Board Stepping Module for 4 Phrase Stepper Motor
KWD 3.500
-18%
LC1D95 New Contactor, 50/60Hz AC Definite Purpose Contactor 3 Poles Coil AC Contactor 220V 95A (1PCS) for Power, Distribution and Power Applications.
KWD 20
SVR1000 Single Phase Protection Relay Over-Voltage 20V-80V Under-Voltage 0.1V-30V AC/DC(AD48)
KWD 11
AD584KH High Precision 4-Channel 2.5V/7.5V/5V/10V Voltage Reference Module with Case
KWD 8.500
