Application
The Anrik wedge anchor is made from high quality carbon steel, and is zinc plated. The concrete anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull out values in concrete are needed. It is for Concrete only, not for block or brick base material

Diameter of Anchor
The diameter of the anchor is 1/4"

Length Anchor
The length of the anchor is 2-1/4"

Quantity: 20 pieces

Drill Bit Diameter/Hole Diameter
Drill bit diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only)

Thread Length
The length of the threads on the anchor is 1-1/4" in length

Minimum Embedment Depth
The minimum embedment depth into the concrete is 1-1/4"

Torque Value
The required installation torque of the anchor is 4 ft/lbs

Maximum fixture thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for the anchor is 1". This will ensure that the minimum embedment depth of 1-1/4" will be met