Installation Steps
It is easier to connect one side of the spring to the curved side of the mounting plate, this side has 2 small holes (the top hole has greater tension than the bottom hole).
In the tensioner Among the 5 screws/bolts, 2 lock nuts and 2 washers included in the kit, use only small screws/bolts and lock nuts to connect the tensioner arm to the mounting plate.
Remove the old screws from the housing cover, place the tension plate on the housing cover, then use 3 identical screws to install the tension plate on the top of the housing cover and tighten the new screws.
Take the largest screw/bolt and add a washer, then the chain tensioner, then another washer, and then lock the nut to any of the 4 large holes on the tensioner arm (make sure two Washer on the side)
Connect the spring from the tensioner plate to the tensioner arm.
Dear friend, thank you for choosing our store.
Please check the product information, especially the size and models before placing the order.
For bulk buying, please contact us by email for more favorable discount.
For any questions about products, tracking information or after-sales problems, please DON'T hesitate to contact us by email and we willl give you a quick and satisfactory answer as soon as possible.
(There may be a delay in replying to emails during weekends and holidays. Thanks for your understanding.)
Any suggestions that can help us improve will be much appreciated.