Search

Search

Rubber Grommet 1/2 Inch, Hydro Rubber Grommet Donut Type to make Waterproof Seal in DIY Hydroponic Systems and 16mm or 1/2 Inch Barbed Elbow Tee Straight Y Connector and Vinyl Tubing (Pack of 25)

KWD 7
Brand
HORTIPOTS
Category
Grommets
Weight
1 g
– 1 +

Special Features

  • WATER TIGHT Rubber Grommets: in connections of DIY hydroponic systems, dutch buckets, dripping systems, siphon aquaponic systems and irrigation systems…
  • LEAK-FREE SEAL: Donut-shaped Rubber Grommets help transfer water or nutrient solution from one reservoir to another one with tubing and barded fittings or piping and 1/2 Inch Vinyl Tubing
  • DURABLE: periodically replace worn old ones in existing dripping or hydroponic systems to ensure air and water tight seals in your systems
  • It goes with barded connector fittings; then, connector goes with Vinyl tubing, hose or poly drip line of same size
  • The inner diameter of rubber grommet is 1/2 inch but the drilled hole on the bucket it fits into will need to be 13/16 inch~7/8 Inch

Description

Drill the right size hole on the reservoir and push rubber grommet in; then, insert the pipe or connectors.
Be sure grommet's groove is fully inserted into the drilled hole.
If you have trouble with connection, please use soap or oil on the Barbed Elbow, Barbed Tee, Barbed Straight, Barbed Y Connector or PVC pipe to slide through drilled hole on the bucket or tank easier.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}