Search

Search

VS50664R Valve Cover Gasket Set Fit for Ford F150 F250 F350 Super Duty Expedition 5.4L,for Mustang Explorer 4.6L,for Lincoln Mark LT Mercury 5.4L, Mountaineer 4.6L,for Avanti 4.6L #VCF330-C VS50372

KWD 8.500
KWD 9.500
Brand
BENERAY
Weight
169 g
– 1 +

Special Features

  • 【Engine Valve Cover Gasket Kits】：Fit for 2005 - 2006 Avanti , for Ford Expedition 2005 - 2006, for Ford Explorer 2006, for Ford for F-150 2004-2006 , for Ford F-250 2005-2006 , for F-350 Super Duty 2005-2006 , for Ford Mustang 2005-2006, for Lincoln Mark LT 2006, for Lincoln Navigator 2005-2006 , for Mercury Mountaineer 2006
  • 【Gasket Sets interchange OE Part Number】：VCF330-C, VS50664R, VS50372
  • 【Sealed Well】：The engine valve cover gasket can effectively seal the oil, coolant, and gas inside the cylinder, conduct heat to dissipate heat, and provide a good working environment for the engine.
  • 【Withstand Harsh Conditions】：Advanced manufacturing technology ensures durability and optimum operation in higher or lower temperatures.
  • 【Important Notice】：These gaskets are designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this kit.Please check interchangeable part numbers to confirm the compatibility before purchasing.

Description

Interchange Part #：
VCF330-C, VS50664R, VS50372
Valve Cover Gasket Kits Suitable for the following vehicles：
For Avanti Avanti 4.6L 2005-2006
For Ford Expedition 5.4L 2005-2006
For Ford Explorer 4.6L 2006
For Ford F-150 5.4L 2004-2006
For Ford F-250 Super Duty 5.4L 2005-2006
For Ford F-350 Super Duty 5.4L 2005-2006
For Ford Mustang 4.6L 2005-2006
For Lincoln Mark LT 5.4L 2006
For Lincoln Navigator 5.4L 2005-2006
For Mercury Mountaineer 4.6L 2006
Material Composition：
Rubber
When your car has the following problems, please replace the valve cover gasket kit in time：
1. The vehicle has recently overheated.
2. Bubbles in the radiator overflow or expansion tank during cranking.
3. Low compression.
4. Wet spark plugs.

Installation Precautions:
1. Drain all of the oil and coolant from your engine.
2. Clean the surface of the head and block and bolt holes.
3. Make sure the engine does not overheat during the purging process, or head gasket damage could occur again.

Professional installation is strongly recommended.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}