This kit will come with nuts, washers, and threaded lamp pipes. The nuts is used for fastening the lamp pipes and the flat washers can distribute loads of threaded pipes, provide a smooth surface. Mainly applied on repairing or replacing chandelier,ceiling light or DIY projects.

Specification
Material: Carbon Steel
Surface Treatment: Zinc Plating
Thread Size: 1/8IP
Lamp Pipe Inner Dia: 7mm / 0.28"
Lamp Pipe Length:20/40/50/100/200/300mm,0.79"/1.58"/1.97"/3.94"/7.87"/11.8"
Sloted Hex Nut Size: 14x30mm / 0.55"x1.18"
Nut Size: 4mmx14mm / 0.16"x0.55"(T*W)
Flat Washer Size: 10mmx20mm / 0.39"x0.79"(ID*OD)
Teeth Washer Size: 10mmx17mm / 0.39"x0.67"(ID*OD)
Packing List: 6 x Lamp Pipe(20,40,50,100,200,300mm each size have 2pcs), 2 x Slotted Nut, 24 x Nut, 24 x Flat Washer, 24 x Teeth Washer, 24 x Lamp Pipe Insert Plug(Black, Plastic)

Advantage
1.This kit including the thread pipe, nut, washers, and it can save your time and effort to find match parts.
2.Threaded lamp pipe has a hollow center which allow wire to pass through. Also, the back insert plug can be installed on the hole to protect wire from a abrasion.

Instruction
1.Before you screw the nuts on the threaded lamp pipe, install the washers firstly.
2.The lamp pipes both ends can insert the black plugs to protect your electric wire.

NOTE: Please confirm the thread size.