Application--for 6.6L Duramax engines with Allison automatic transmissions.
Duramax 2500 & 3500 Flywheel Holder---Used with Duramax 2500 / 3500 pickup. Use toothed pieces only remove metal spring-loaded inspection plate on the bottom of the transmission, then tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
Duramax 4500 & 5500 Flywheel Holder---Use with Duramax 4500 / 5500 trucks. Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
36mm Socket--Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and re-torque on installation.36mm 12 point socket can also be used on axle.
Benefits-- Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
-8%
Sunluway for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with Crank Bolts
KWD 11
LS Rear Cover Billet Alignment Tool Fits for LS Series Engines 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS9 LSA LQ4
KWD 8.500
Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints
KWD 11.500
5pcs Strut Nut Socket 18mm 19mm 21mm 22mm 24mm with 12 Point 1/2" Drive, Suspension Strut Nut Socket Tool Easy Remove Strut Nuts
KWD 18.500
