Features : 100 Percent Brand New, Never Mounted, High Quality Features : motorcycle cushion cover, prevent slippery, prevent bask in, water proof, scratch-resistant flowers Color : As picture show Package included : 1 Seat Cover As Pictures Material : LDurable double stitched rubber/vinyl material. Stretchy material allows for easy installation. Fit for OEM seat only. Easy To Install Fitment : Fit most of dirt bike Please Make Sure You Can Find Your Bikes In The Fitment Before You Order. And Feel Free To Contact Us Seat cover installation instructions : 1. Install the motorcycle polo tool is a il gun, one quarter inch il, screwdriver, pliers, scissors. 2. Remove the seat bottom seat from the motorcycle. 3. Put the new seat cushion sets of seat, make sure the seat cushion set in the center of the base, with a il gun on the base with good stitching needle fixed on both ends. 4. Then it with stitching needle fixed on both sides of the center. 5 slowly down the side of the seating of the stretch to flattening fold, then immediately with stitching needle fixed. 6, be careful to seating head stretch until smooth smooth, then use stitching needle fixed. 7, be careful to seating tail stretching until smooth smooth, then use stitching needle fixed. 8. If you find a seat covers the middle fold, please remove some stitching needle, then tweak fold and fixed it up. 9. Carefully remove extra seating material with scissors. It is about 1 cm far from stitching needle. 10. Installed new seating base put back in the motorcycle later on. Please Make Sure You Can Find Your Bikes In The Fitment Before You Order. And Feel Free To Contact Us